In-Shop Service or Repair of your Monitor or Laser Heater 

​

SAME DAY and WEEKEND appointments are available.

​

Pricing Hourly Rates:

​

In-Shop Service or Repair      $59 / hr

       Same Day                        $79 / hr

       Weekend                          $79 / hr

       Same Day & Weekend     $89 / hr

​​

Instructions for disconnecting your heater / fuel:

 

Please read ALL instructions & call if you have questions: 

​

If you have a lifter pump, please call for instructions before starting to disconnect your fuel / heater. A lifter pump is used when your tank is lower than your heater and you cannot gravity feed the fuel to your heater. Here is an example of a Lifter Pump.

​

If you do not have a lifter pump:

 

• Turn off the fuel at the tank.

• Unplug the heater from electrical outlet.  

• Disconnect the fuel line to the back of the heater.  Be careful to not twist the copper line when disconnecting the fuel supply connection in the back of the heater (use 2 wrenches to loosen the fitting).  Place absorbant material under where you are working - some fuel will leak out.

• Plug the fuel line coming into the heater and cap the fuel line coming out of the heater. (You may purchase a cap and plug from the hardware store or you can pick up from our shop or purchase from our Web Store using this link: CAP & PLUG and we will ship them to you). Note: be sure you purchase the correct cap & plug (Flared or Compression Fittings - most are flared).

• Disconnect the heater from the flue pipe. You do not need to bring the flue pipe into the shop, only the heater unless there is an issue with your flue pipe. There is a small spring (Pipe Holder) on top of the flue pipe that needs to be disconnected on one end prior to removing the heater. (If a Laser Heater, it will be a Pipe Stopper instead of a spring).

• Please keep the heater UPRIGHT when transporting. The heater may not function correctly and may need further repair if you put it on its side.

 

We ask that you social distance when dropping off your heater. Customers are not allowed to remain in the shop. We will call you when your heater is ready.

If you need same day repair, Contact us to schedule an appointment. You may not wait in the shop. For same day repairs, drop off as early as possibe and we will have it ready by 5pm the same day.